To produce an embossed high heel steel tube, you will need the following materials and equipment:

1. Steel tube with the desired size and thickness for the high heel
2. A hydraulic press or other machine with enough force to apply pressure to the steel tube
3. A die with the desired embossed pattern for the high heel
4. Lubricant to apply to the die and steel tube to reduce friction and protect the die from damage

Here is the general process for producing an embossed high heel steel tube:

1. Begin by preparing the die and the steel tube. Apply lubricant to the die and the steel tube to reduce friction and protect the die from damage.
2. Place the steel tube in the press or other machine, making sure it is aligned with the die.
3. Apply pressure to the steel tube using the press or machine. The amount of pressure will depend on the thickness of the steel tube and the desired depth of the embossed pattern.
4. Once the desired amount of pressure has been applied, release the pressure and remove the steel tube from the press or machine.
5. Inspect the steel tube to ensure that the embossed pattern is to your satisfaction. If necessary, adjust the pressure or make any necessary adjustments to the die or steel tube to achieve the desired result.
6. Repeat the process as needed to produce the desired number of embossed high heel steel tubes.

It is important to follow proper safety procedures when using a press or other machine to apply pressure to the steel tube. Make sure to wear protective equipment and follow all instructions and warnings provided by the manufacturer.